Replace Lock in UPVC Door
A professional locksmith should be called when your door locks made of upvc are not working properly. They are fast efficient, reliable, and can complete the job to the highest standards.
Changing a upvc barrel lock isn't difficult to do. It's just a matter of knowing what you need to do and follow the steps below.
Lock the barrel off.
uPVC windows and doors are popular in a variety of homes. They let natural light get into the home and be opened with the right key. It takes just five minutes to change the barrel on a lock made of uPVC uPVC. It's a simple fix if you have lost your key, or if a tenant has moved out and not returned it, or the lock barrel is damaged.
You will need to remove the screws that hold the handles first. This will allow you to move the handles removed from the way to allow you to access the barrel screw that locks them. Be cautious not to loosen the screws too fast because it could damage the handles or cause them to fall off while you are working.
After the screws are removed, find the screw that holds the barrel lock in place on the inside of your door. It is a screw that stands out and is a different color to the screws on the door. With a Phillips screwdriver, remove the screw. You can take the key you use to open the lock, and then insert it into the barrel. Turn it to the left as much as possible. This should free the barrel and make it easier to pull it out of the door.
After loosening the screw, you will be able to break the pins that hold the Euro Cylinder in place. You will need pliers that are strong, or mole grips to accomplish this. Take the protruding end of the euro Cylinder and bend it up and down, and from side to side. This will break the two support pins that hold it in place.
Once the old cylinder has been taken gone, you can begin the process of installing the new one. To ensure that you get the correct replacement, first determine the cylinder's size. This can be done by measuring the distance from the center of the circular part of the keyhole to the middle of the square spindle. The measurement should be taken from the upper spindle.
Change the Cylinder
The euro cylinder is the main locking mechanism for the door made of upvc. It is easy to replace and doesn't require a handyman or locksmith. In fact, if the lock you have isn't anti-snap or anti-bump it should be changed to one with this security built-in. They're inexpensive and could save you money and hassle in the event that your locks have been compromised.
Open the door and stand in the front of it. This will allow you to reach the screws that hold the handle with your hand or the appropriate tool. Let it loosen a bit perhaps a quarter turn to begin the process.
The cylinder will now be easy to remove, as the screw will no longer hold it in its place. The next step is to determine the size replacement cylinder you will require. There are about 25 different sizes. It is recommended to take the old cylinder along when you buy a new one so that you can be sure it will fit.
If you're unsure of the measurement, take a measurement from the screw hole's center to the end of cylinder. You can be certain that you are buying the right sized cylinders to fit your upvc door by measuring from the center of the screw hole to the end of the cylinder.
When you have your new cylinder, place it into your door in reverse order to how you took out the old one. It may be a little tricky to align the lock cam, but this is usually just an issue with alignment and will be fixed eventually.
Now you will need to screw in the long securing screws. After that, you can test it to make sure that the cylinder is secure within the door. It is now time to attach the handle back to the door and then test it again. If everything is fine, the cylinder lock inside your Upvc door has been replaced and you should have added an additional layer of security to your home.
Switching the Handle
There are many reasons why the door knob or handle may become loose. This could be due to wear and tear of the handle itself, or it could be due to the square spindle inside the handle becoming worn or damaged by excessive use or force. In this instance, the door handle will need to be replaced.
It is essential that the door is opened so that it will not close between taking off the handle and replacing it. Then remove the screws from the inner surface of the plate by using a screwdriver. This will release the handle from the plate. Be careful not to lose the screws as they'll require re-screwing to their original position later.
You can now take off the handles to access the cylinder lock inside the door. The cylinder lock will be round or bulb-shaped, and is only found in multi-point locks for upvc and some aluminum doors. It is the same as changing the handle, except that you'll have to remove the old cylinder off the door and replace it with a new one.
When choosing replace window locks upvc is important to think about the size. The handle should be of the same size as the original because it will have to fit the existing screws holding the handle in place. You can start by consulting the table of sizes that provides the most popular sizes of replacement handle plates and their keyhole centers.
It is also worth considering upgrading your upvc doors handles to more secure ones like a Sold Secure SS301 or a 2* Kitemark set of security handles. This will increase the security of your home as well as making it easier to operate the door. These sets are a bit more expensive however the added security and peace mind is worth it. The constant need to push the handle of the door up and down in order to open and shut it is not something you want to be doing.
Change the Lock
The lock on your uPVC door can be a weak point for burglars. Upgrade your uPVC to multipoint locking to ensure its security. This would include an open hook and a deadbolt to keep out burglars. A professional locksmith can assist you with this, however it is also possible to complete the job yourself. You'll require several tools, but the process is quick and easy.
The first step is to loosen the screws that are holding the handle. By using a screwdriver you can take the screws off and place them in a safe place. Then, you can lift the handle and expose the screw that holds the cylinder in position. You can remove this screw and replace it the new one. You should make sure that the screw is identical to the original. It should be aligned properly with the barrel of lock.
Changing the lock on your uPVC door can appear daunting. It is essential to the security of your home. If you make mistakes, it may make it impossible to unlock the door. However, if you know how to accomplish it, the procedure is fairly simple and costs much less than calling a locksmith.
To change the lock on your uPVC door, you'll have to open the inner faceplate of the lock. You'll need to look for the screws inside the door, and the retaining bolt outside the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.
There are a variety of reasons you may need to replace the lock on your uPVC doors. You might need to alter the lock on your uPVC door for many reasons.
Anyone with basic DIY skills can alter the mechanism of a uPVC lock. If the lock is stuck, you will need to check the hinges inside the mechanism. If the hinges are lubricated it is likely to be a simple repair. If you're not sure that it will be a simple fix, consult a professional.